Members walterhtx Posted April 11, 2007 Members Share Posted April 11, 2007 *** This item has been sold *** Framus Cobra w/ footswitch for sale $1,399 - shipped (neg.) 100W Head , hand-wired, brand new Electro Harmonics EL34 power tubes (professionally biased), perfect working order, few minor cosmetic blemishes (barely visable). Killer amp! I hate to sell it but need the money. $3,200 retail - get it for $1,399 (maybe less). More pic's available upon request. Link to comment Share on other sites More sharing options...
Members scottcrud Posted April 11, 2007 Members Share Posted April 11, 2007 nice head Walter, what do you want to get...a Blackmore? hehehe. Link to comment Share on other sites More sharing options...
Members ghastlyone Posted April 11, 2007 Members Share Posted April 11, 2007 is this the newer version with external bias located on the back? thanks Link to comment Share on other sites More sharing options...
Members walterhtx Posted April 11, 2007 Author Members Share Posted April 11, 2007 Scott, I dunno, maybe. Walter Link to comment Share on other sites More sharing options...
Members walterhtx Posted April 11, 2007 Author Members Share Posted April 11, 2007 is this the newer version with external bias located on the back? thanks No, this is the older one. However, bear this in mind - to bias the amp properly, you need to know the plate voltage and the only way that can be determined is by pulling the chasis out of the shell. So, even on the newer version of the amp with the external bias points, you will still have to pull the chasis out. Just food for thought. Walter Link to comment Share on other sites More sharing options...
Members scottcrud Posted April 12, 2007 Members Share Posted April 12, 2007 Walter is a straight shooter, and a good guy to deal with. This head is super clean. Link to comment Share on other sites More sharing options...
Members MusicIsTheTruth Posted April 12, 2007 Members Share Posted April 12, 2007 pm sent. Link to comment Share on other sites More sharing options...
Members guitarman967 Posted April 13, 2007 Members Share Posted April 13, 2007 No, this is the older one. However, bear this in mind - to bias the amp properly, you need to know the plate voltage and the only way that can be determined is by pulling the chasis out of the shell. So, even on the newer version of the amp with the external bias points, you will still have to pull the chasis out. Just food for thought.Walter Not true at all..Ever heard of the Weber Biasrite?No to mention if you pull a tube and put the meter (Set to AC voltage) in Pin 3 your will get the plate voltage reading. Link to comment Share on other sites More sharing options...
Members walterhtx Posted April 13, 2007 Author Members Share Posted April 13, 2007 guitarman967,I'm not an amp repair guru by any measure, that was my understanding that you had to pull out the chasis to get the plate voltage. I was mistaken thanks for the information. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.