Members pogo97 Posted January 26, 2018 Members Share Posted January 26, 2018 I have a set of vintage UFIP hi hats. They are *very* tarnished. I've left the patina on until now but wonder if cleaning them would brighten up the sound a bit. Should I do it? And if so, how. Thanks Link to comment Share on other sites More sharing options...
Members pogo97 Posted January 26, 2018 Author Members Share Posted January 26, 2018 Okay then, I'll answer myself. This thread suggests that cleaning brightens up the sound. So I went ahead with cleaning. I'm removing a half-century or more of dirt, so rather than use a boutique cymbal cleaner that I'd need to go to the city to buy, I started with the brasso in the the cellar. But I was going to have to buy about $20 of brasso to complete the job and it smells bad. So I tried this, the flour/salt/vinegar version, and it's working a treat. I've done them about three times now -- they were *very* dirty -- and they shine like the morning sun except a few spots where the surface may be pitted or may have had water droplets on it -- I don't know. They're back on the stand now and they are sounding lovely. No more dullness. Silly me for not doing this before -- and just wishing they sounded better. Now I'll have to learn to play them. From here on, I may opt for a cymbal polish, but cheap and cheerful worked fine for the heavy lifting. Link to comment Share on other sites More sharing options...
Members Dendy Jarrett Posted January 27, 2018 Members Share Posted January 27, 2018 Try Bar-Keepers friend.However, if they are 50 year old HiHats - IMHO - I would leave the patina.UFIP are going to be dark in nature simply because of the way they are made (older hand hammered) If you use Bar-Keepers friend, lay an old towel in the bottom of a bathtub (to keep from scratching the bottom of the tub). Wet the cymbal in about a half inch of water. Sprinkle the BK friend and just let it do its thing. Don't use any aggressive scrubbing. Then rinse and dry - You'll be amazed how well it works.D Link to comment Share on other sites More sharing options...
Members pogo97 Posted January 27, 2018 Author Members Share Posted January 27, 2018 Thanks Dendy. I'll have to check out this BKF stuff. Last night I removed the vast bulk of the patina using flour, salt and vinegar and it has made a strong positive difference to the tone from frustrating/muffled to "oh my, that's nice." I'm a piano and guitar player mostly, so I don't have multiple hats or anything -- one good snare (Pearl Session Custom) optimized for brushes and the one set of hats only -- so a balanced, flexible sound is more important to me than antique appearance. In passing, could you point me at a teaching source for playing hats? Especially with brushes. And, what should my next kit item be, do you figure? I'm leaning toward a ride. Link to comment Share on other sites More sharing options...
Members pogo97 Posted February 20, 2018 Author Members Share Posted February 20, 2018 Recipe for patina remover / cleaner. I've used this a few times now and it's gentle and effective. There are a few pits/spots it doesn't get, but generally excellent performance, cheap and non-toxic. 1 cup warm household vinegaras much salt as you can dissolve in the warm vinegar1 cup or so flour -- the flour thickens the liquid to a paste that sticks to the cymbals, so adjust accordingly rub the paste all over the cymbal and rub it in -- I use my hands, but a soft brush or cloth will also servelet sit for 5 minutesrinse off with warm water repeat as needed rinse and dry Link to comment Share on other sites More sharing options...
Members 1001gear Posted February 20, 2018 Members Share Posted February 20, 2018 Windex is surprisingly good for the green stuff. I think if you were to soak cymbals in it, that might be enough. Another quickie is tomato ketchup; prolly easier and cheaper than Windex per square foot. A tool I've never come across would be a special brush for lathed cymbals - something like a Discwasher for cymbals. Link to comment Share on other sites More sharing options...
Members pogo97 Posted February 20, 2018 Author Members Share Posted February 20, 2018 A tool I've never come across would be a special brush for lathed cymbals - something like a Discwasher for cymbals. http://www.leevalley.com/en/wood/page.aspx?cat=1,43415,65190&p=10259 Link to comment Share on other sites More sharing options...
Members 1001gear Posted February 21, 2018 Members Share Posted February 21, 2018 Those look pretty useful. Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted February 21, 2018 Share Posted February 21, 2018 Recipe for patina remover / cleaner. I've used this a few times now and it's gentle and effective. There are a few pits/spots it doesn't get, but generally excellent performance, cheap and non-toxic. 1 cup warm household vinegar as much salt as you can dissolve in the warm vinegar 1 cup or so flour -- the flour thickens the liquid to a paste that sticks to the cymbals, so adjust accordingly rub the paste all over the cymbal and rub it in -- I use my hands, but a soft brush or cloth will also serve let sit for 5 minutes rinse off with warm water repeat as needed rinse and dry Very cool - thanks for posting that! How well did the logos on the cymbals (if any) survive? Link to comment Share on other sites More sharing options...
Members pogo97 Posted February 22, 2018 Author Members Share Posted February 22, 2018 No logos, just stamps, which survived just fine. Link to comment Share on other sites More sharing options...
Members pogo97 Posted February 22, 2018 Author Members Share Posted February 22, 2018 before and after [ATTACH=JSON]{"data-align":"none","data-size":"full","title":"IMG_0818.jpg","data-attachmentid":32169761}[/ATTACH][ATTACH=JSON]{"data-align":"none","data-size":"full","title":"IMG_1931.jpg","data-attachmentid":32169762}[/ATTACH] Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted February 22, 2018 Share Posted February 22, 2018 Aah, stamps. Looks like the cymbals cleaned up nicely! Link to comment Share on other sites More sharing options...
Members pogo97 Posted February 22, 2018 Author Members Share Posted February 22, 2018 Yep. But the great thing is how much better they sound. Night and day. Pity there's no before and after recording. Link to comment Share on other sites More sharing options...
Members Voltan Posted February 23, 2018 Members Share Posted February 23, 2018 as much as i like leaving the patina on things... ive tried all the above mentioned products and for my money, ketchup works like a champ... its about the same as vinegar/flour but no mixing.. ( its vinegar and weak acids, and clean up is way faster...) dont buff!!!! dont screw up the tone rings/ridges in the cymbals... remove as little metal as possible, remember... the thinner the cymbal, the deeper the pitch... and every time you clean a cymbal youre losing metal... Link to comment Share on other sites More sharing options...
Members Voltan Posted February 23, 2018 Members Share Posted February 23, 2018 dr. david joseph bohm believed that every time a metallic percussive instrument, ie cymbals and gongs, the sound is coupled with an active field of electrons donated from the metal instrument that moves and falls back to the instrument as the sound pressure decays... interestingly enough he said that not all of the electrons return with the field and some are donated to other matter... so, theoretically... after a loooong long time of playing my gongs, they will eventually be bronze "dust" (electrons).... dissolved into the matrix... Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted February 23, 2018 Share Posted February 23, 2018 dr. david joseph bohm believed that every time a metallic percussive instrument' date=' ie cymbals and gongs, the sound is coupled with an active field of electrons donated from the metal instrument that moves and falls back to the instrument as the sound pressure decays... interestingly enough he said that not all of the electrons return with the field and some are donated to other matter... so, theoretically... after a loooong long time of playing my gongs, they will eventually be bronze "dust" (electrons).... dissolved into the matrix...[/quote'] I'm afraid there's only one way to check Dr. Bohm's plasmon theories, and that's through experimentation and observation. We're going to need you to bang on a gong all day... every day, until it starts to disappear. Or not. Either way, it's probably going to take a while... Write up a proposal and I'll bet you might even have a decent shot at getting a research grant. You can play these two songs on continuous loop while you're working on your experiment... [video=youtube;ZclddLcOYYA] [video=youtube;TVEhDrJzM8E] Link to comment Share on other sites More sharing options...
Members Voltan Posted February 23, 2018 Members Share Posted February 23, 2018 dear lord, phil... like i need gong tracks? but i do like the way you think... i recently hooked up with a fellow thats keen on my theory about theta brain wave state and gongs... the whole dmt dump by pineal gland (which normally happens in deepest realms of sleep..). dr b was a pretty sound thinker... from some perspectives... Link to comment Share on other sites More sharing options...
Members Voltan Posted February 23, 2018 Members Share Posted February 23, 2018 here phil... headphones,, Link to comment Share on other sites More sharing options...
Members Mikeo Posted March 2, 2018 Members Share Posted March 2, 2018 Have I mentioned this before. [ATTACH=JSON]{"data-align":"none","data-size":"full","title":"71Z79p-HlbL._SY550_.jpg","data-attachmentid":32174733}[/ATTACH] Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted March 2, 2018 Share Posted March 2, 2018 Have I mentioned this before. [ATTACH=JSON]{"data-align":"none","data-size":"full","title":"71Z79p-HlbL._SY550_.jpg","data-attachmentid":32174733}[/ATTACH] Does it damage the silk screened logos? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.