Members bmast160 Posted August 22, 2011 Members Share Posted August 22, 2011 want to run ipod or mac to one jbl prx612m but im not sure what kind of cable to do this with mini trs to 1/4 trs or mini trs to xlr??? this is the manual for the pa which shows the connections on the back: http://www.jblpro.com/catalog/support/getfile.aspx?docid=1672&doctype=3 Link to comment Share on other sites More sharing options...
Members kwote Posted August 28, 2011 Members Share Posted August 28, 2011 The input says, "Balanced XLR / 1/4 inch combo jack with XLR loop through" and the other end should coming from the ipod or mac should be 1/8" Not sure if anyone manufactures that, but you could get an adapter if need be. The best place to check online for cables and adapters is http://allelectronics.com and the best place to check locally would be Radio Shack or a music store like Guitar Center. Good luck! Link to comment Share on other sites More sharing options...
Members Bugzie Posted February 11, 2012 Members Share Posted February 11, 2012 You really should get some kind of DI with an isolation transformer. Might just save your Ipod or Ipad if the phantom power is on. Google Whirlwinds pcDI to see what I mean. Sometimes doing things right is the cheapest route . I woouldn't limit myself to one dealer for cables. There are to many choices to call one the best. Also get decent cables. While any copper can transmit a signal, the difference is in the durability of the cable. Always carry back up cables! Link to comment Share on other sites More sharing options...
Members Miko Man Posted February 11, 2012 Members Share Posted February 11, 2012 You need to sum the stereo output to mono. I use the Whirlwind "podDI" box when I'm not using a mixer, or only want to use a single channel. Mark C. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.