Members WashburnGuy Posted March 30, 2011 Members Share Posted March 30, 2011 I recently picked up a Yorkville 100 Bass Master combo as a practice/backup amp to my Hartke HyDrive. Oddly enough, when I connect my Digi Tech Overdrive pedal, nothing.....dead.....not a sound comes out. Move the same setup over to my Hartke, everything works fine. Same results when I tried this setup with an old Behringer OD pedal. Not a single note to be heard. Any ideas? Should I try using the effects loop? What's the best way to go about it? Thanks for any help! Link to comment Share on other sites More sharing options...
Members T. Alan Smith Posted March 30, 2011 Members Share Posted March 30, 2011 How, exactly, are you routing your pieces? Link to comment Share on other sites More sharing options...
Members WashburnGuy Posted March 30, 2011 Author Members Share Posted March 30, 2011 How, exactly, are you routing your pieces? Basic setup.......bass out to effect input, effect output to amp instrument input. All cables tested individually and work fine with no effects connected. Link to comment Share on other sites More sharing options...
Members T. Alan Smith Posted March 30, 2011 Members Share Posted March 30, 2011 Batteries? Link to comment Share on other sites More sharing options...
Members WashburnGuy Posted March 30, 2011 Author Members Share Posted March 30, 2011 Batteries? nope.....AC adapter.........neither the One Spot or Danelectro works in the Yorkville but both work in the Hartke?????? Link to comment Share on other sites More sharing options...
Members T. Alan Smith Posted March 30, 2011 Members Share Posted March 30, 2011 So the Yorkie works with both cables when you plug the bass directly in? But neither of the pedals work when you put them in-line between the bass & Yorkie or Hartke? Link to comment Share on other sites More sharing options...
Members WashburnGuy Posted March 30, 2011 Author Members Share Posted March 30, 2011 So the Yorkie works with both cables when you plug the bass directly in? But neither of the pedals work when you put them in-line between the bass & Yorkie or Hartke? No....All the cables work, all the time. Everything works with the Hartke but, nothing works with the Yorkville. VERY strange????? Link to comment Share on other sites More sharing options...
Members T. Alan Smith Posted March 30, 2011 Members Share Posted March 30, 2011 Screwy. :-/ So, the output of the bass guitar checks out?The input and output of both amps check out?And the output of both pedals work only with the Hartke? Link to comment Share on other sites More sharing options...
Members lug Posted March 30, 2011 Members Share Posted March 30, 2011 This defies the laws of physics! Link to comment Share on other sites More sharing options...
Members bassman1956 Posted March 30, 2011 Members Share Posted March 30, 2011 This defies the laws of physics! I KNEW you were involved! Link to comment Share on other sites More sharing options...
Members WashburnGuy Posted March 30, 2011 Author Members Share Posted March 30, 2011 Screwy. :-/ So, the output of the bass guitar checks out?The input and output of both amps check out?And the output of both pedals work only with the Hartke? That about sums it up! Link to comment Share on other sites More sharing options...
Members Jazz Ad Posted March 30, 2011 Members Share Posted March 30, 2011 Are all your cables mono with only 2 connectors at the jack? Link to comment Share on other sites More sharing options...
Members perrydabassman Posted March 31, 2011 Members Share Posted March 31, 2011 Think maybe your output level on your pedals is too high for the input of the Yorkville? Is there a passive/active input? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.